EVENT DESCRIPTION

#POWERPULL

The rovers showcase there power and ram there motors to pull heavy weight to the max distance in least time.

REGISTER

TEAM RULES

1. There can be a minimum of 3 and a maximum of 5 unique members in the team.

2. Team Members need to bring their college ID cards.In the prelims there will be obstacles,teams have to avoid the obstacles and put the ball in the basket.

3. The participants wiil be provided with a 220V,50Hz single phase power supply.

4. The decision of coordinators will be final.

GAMEPLAY RULES

1. This is a time based pick and place event so fastest and the most efficient robots will win.

2. All the rounds will be solo with increasing arena complexities (increase in number of weight) towards the finals.

3. Time taken by the robots to complete the weight pulling up will be the only criteria of judgement for qualification to the next round.

4. There will be total 2min of technical help for every team which can be taken at most 2 division (e.g.: 1 min 30 sec + 30 sec or 1 min + 1 min)

5. Under any circumstances, after the beginning of the round team participants must not touch the bots except in the technical timeout.

6. Teams who chose to quit (for technical fault) will not be considered while shortlisting candidates for the next round in any case.

7. Stepping on the track is forbidden. This can only be done by coordinators. Failing to abide will lead to disqualification without any refunds.

8. No two team should share the same robot.

BOT SPECIFICATION

1. Participants will be provided with a standard 220-volts 50 Hz AC power supply outlet.

2. The voltage is limited to 24V DC .

3. A 220 V AC supply will be provided.

4. The robot should fit in a box of dimension 30cm (l) x 30cm (b) x 30cm (h) with the picking mechanisms.

5. Weight of Pulling will solely depend on the weight of the bot.Minimum 5kg with 10%Tolerance rover should take part( For example:- if a bot of 5kg takes part it will pull a weight of 5kg ).

6. The robot may be wired or wireless. For wired bots, the length of the wiree must be enough to cover the entire arena.

7. Lego kit or spare parts are strictly prohibited. However team can use readymade gear system.

8. The potential difference between any two points should not exceed 24 V DC.

CONTACTS

Diganta Paul 8336802976